Do you know how to solve the problem of inconsistent production sizes of roll forming machine

   Don’t panic when the tile press has different production sizes. There are several solutions as follows.

    First, check whether the current length of the display screen when the machine is stopped matches the actual length.

1. If the actual sheet length of the roll forming machine is greater than the set length and the length error is very small, it is generally caused by the large inertia of the machine. The solution is to adjust the compensation amount or outer wheel coefficient. Machines with frequency converters can increase the deceleration distance.
2. If the actual plate length of the roll forming machine is greater than the set length, and the length error is greater than 10mm, this situation is caused by a loose encoder. Carefully check and adjust the counter bracket.
3. If there is a difference in the actual plate length produced by the roll forming machine, and it is large and irregular, check whether there is a welding machine, signal transmitting, receiving equipment, etc. on site. If there is no such equipment, the encoder may be damaged or the PLC may be damaged.